How to Clean Fake Jewellery: 10 Simple Tips to Restore Shine and Beauty
Artificial jewellery are economical and stylish, although they tend to be delicate. Learning how to clean fake jewellery at home can enhance the sparkle of the jewel and even maintain its lifespan.
Proper cleaning techniques allow you to restore the sparkle of your favourite pieces without damaging them. This guide covers simple ways to clean various types of fake jewellery, like gold-plated necklaces and costume rings, to keep your accessories fresh and vibrant.
How to Clean Fake Jewellery at Home
Soapy water is the most suitable solution for cleaning fake jewelry, add some soap to plain water. A soft cloth may be soaked in this soapy water, and each item may be gently wiped. A soft brush can also be utilized for this purpose when there are tough stains. Baking soda, mixed with water, may be used to scrub through layers of dirt. Use a toothbrush to place the mixture on the surface and then wash the area softly. These methods can be applied even by the non-professional cleaning staff as they are relatively easy and efficient in making jewellery sparkle. Fingerprints and dirt stains on any jewellery can be removed with a simple microfibre cloth wipe. Storing and cleaning the pieces after use will ensure that all pieces remain in good condition and sparkle.
10 Best Tips for Cleaning Tarnished Gold Jewellery
Different materials are used to make various parts of fake jewellery pieces.. Knowing them and how to clean them is key. Here are a few specific tips on cleaning dark jewellery that you may find helpful.
1. Lemon Juice
Lemon juice acts as a natural acid. It removes the oxide layer on jewellery and increases its brightness.
How To Do:
- Mix equal material of water and lemon juice.
- Dip the jewellery in this mixture for 10 to 15 minutes.
- With a soft cloth or a toothbrush, wipe the jewellery softly.
- Clean it out with chill water and use a clean cloth to dry it off.
2. Tender Dish Wash Soap
Tender dish soap is the least harmful method of cleaning fake jewellery and, therefore, the most preferable.
How To Do:
- Mix several drops of mild dish soap into warm water.
- Soak the jewellery in the mixture for about 5-10 minutes for dirt removal and soil disintegration.
- It is also necessary to softly scrub the jewellery using a soft toothbrush. Use this brush to get into cracks and other small areas.
- Rinse with cool running water. Dry using a soft and clean cloth.
3. Baking Soda And Salt
A mixture that contains baking soda and salt lifts and removes tarnish and dirt from costume jewellery.
How To Do:
- Cover the bottom part of a small cup with an aluminium counter.
- In the bowl add one of a sweet spoon of baking soda and a dessert spoon of salt.
- Top up the bowl with hot water and move the bowl until both the salt and the baking soda melt in the water.
- soak the ornaments into the material for five to ten minutes.
- Rinse off with chill water and wipe off with a soft cloth to recover the shine.
4. Vinegar And Water
White vinegar, a typically homemade item, is an excellent choice for dark, tarnished, and filthy artificial jewellery pieces.
How To Do:
- Take a small dish and mix white vinegar and water equally.
- Soak the jewellery into the material for 5-10 minutes.
- Take a soft toothbrush and scrub the item to remove any remaining tarnish.
- Certainly, wash the pieces thoroughly in cold water and wipe them off with a dry clean cloth.
Quick Tip: If you’re short on time, use a microfiber cloth to quickly wipe down fake jewellery. This removes surface dirt and oils, keeping your jewellery shiny between deep cleanings.
5. Toothpaste
Toothpaste has a tender polishing quality, which can effectively help clean off mud and stains from fake jewellery.
How To Do:
- A small amount of non-gel and non-whitening toothpaste that is not too thick on the head of a fluffy toothbrush.
- Gently scrub the tarnished jewellery pieces to remove the tarnish
- Then, wash with cool water to remove any leftover toothpaste altogether.
- Use a cloth and lightly tap the jewellery to renew its shine.
Note: If your jewellery is delicate, it’s better to avoid using toothpaste, as it can be too harsh
6. Baby Shampoo
Baby shampoo is a soft cleanser that treats even the most sensitive artificial jewellery without harming it.
How To Do:
- Fill a bowl with hot water and add a few drops of baby shampoo.
- For 5-10 minutes, soak the jewellery in the liquid.
- If there is dirt or mud, use a soft toothbrush for cleaning.
- Wash with chill water and dry with soft fabric.
7. Contact Lens Solution
Contact lens mixture is best, as it is quite soft. This makes it excellent for cleaning fake jewellery.
How To Do:
- First, wet the cotton bud or soft cloth with some lens cleaning solution.
- Using this cloth, rub the jewellery while focusing on all the places on the piece that are marked dirty, then use a soft toothbrush to poke the corners and cracks of the piece.
- After completing these steps, the piece should be washed in cool water and patted dry using a soft, clean cloth.
- This technique is very effective for cleaning more specific and breakable jewellery.
8. Rubbing Alcohol
Rubbing alcohol also works excellently on fake jewellery, not only for its disinfecting properties but also for its cleaning property. It evaporates rapidly and does not leave any traces.
How To Do:
- First, rub a cotton wool ball or a soft piece of cloth in alcohol. Afterward, press the fabric onto the jewellery to remove dirt and oils.
- If spots with thicker and tougher dirt are difficult to remove, take a cotton bud and wet it before lightly scrubbing the affected area.
- This approach is practical for cleaning and sanitising ideal care for those who wear Jewellery.
9. Ammonia Solution
Use an ammonia solution for cleaning fake jewellery. It is effective but use it carefully, as a little more quantity can cause danger.
How To Do:
- Get a small bowl and mix ammonia and water in the ratio of one to six.
- Use the solution sparingly and only for 1-2 minutes while immersing the jewellery.
- Be sure to remove it and wash it with cool water immediately after use. Failing to do so may cause damage.
- Gently press with a soft cloth and let dry.
Note: Ammonia should not be used on jewellery with stones or delicate coatings, as it can be too harsh.
10. Jewellery Polish
- Jewellery Polish is manufactured specifically to restore the lost shine and eliminate staining. It is most often recommended for fake jewellery.Put a bit of the jewellery polishing cream on a non-leather cloth.
- With slow circular movements, apply the cream to the jewellery.
- Repeat the polishing procedure until the jewellery reaches the desired shine.
- Lastly, use a soft cloth to remove any excess polish and restore balance.
Caution: Always use specially formulated polish for artificial or costume jewellery; otherwise, a harsh metal polish will damage the piece of jewellery.
How to Clean New Jewelry Properly
New jewellery should be cleaned carefully to protect the polish. Most new items can be easily cleaned in warm, soapy water with a mild cleaner. Place the items in the solution and let them soak for a few minutes before using a soft toothbrush. After washing the ring with soapy water, wash in cool purified water. Then, pat the jewellery against a piece of cloth to dry it. Refrain from using chemicals in any manner, especially when dealing with more intensive cleaning. Regular and gentle cleaning techniques will suffice to maintain the new jewellery items.
How to Clean Artificial Jewellery
- To clean artificial jewellery,
- Water and a soft cloth and dip it in the soapy water, and rub it gently on the jewellery to remove soil and dust.
- Do not soak the jewellery, as this may impair the finish of the pieces. Use vinegar and baking soda for more intense cleaning.
- Apply a soft brush, then rub the area lightly and
- complete it, wash the jewellery quickly, and dry it effectively to return the gloss.
Simple Techniques to Clean Costume Jewelry
When cleaning costume jewellery, use gentle soap to avoid damaging the delicate materials.
- You can start with warm water and two drops of dish soap.
- Soak a soft piece of fabric, soak a soft cloth in soapy water and gently clean the jewellery.
- A soft toothbrush can be used to clean tight areas on delicate pieces. Do not soak them in water for too long, as it may dissolve the glue used to attach the stones and other decorations.
- After cleaning, plunge into cool water and wipe off with a soft linen cloth. Many chemicals may be used, but weaker ones are preferred, as stronger ones may cause the coatings on the metal to become tarnished.
- Although this form does not involve heavy cleaning, regular cleaning may make your fake jewellery look new.
Essential Maintenance Tips for Best Fake Jewellery
This is what you should do to take care of your best fake jewellery:
Do Not Allow Close Contact With Water: Water is the worst enemy of imitation jewellery, and it can cause rust. Certainly remove all your jewellery, even when showering, swimming, and washing.
Take Care of It: Be cautious with your silver-plated pieces. Store them safely in a dry place, away from sunlight and moisture. To save them, wrap each piece in a soft pouch or in separate compartments in a jewellery box.
Do Not Let Them Contact Harsh Agents: People should try to avoid wearing fake organics in perfumes, lotions, hairsprays, and even cleaning products to prevent coating damage and discoloration.
Watch Out For Where You Are At: If you are planning to exercise or doing any form of physical activity, such as cleaning, avoid fake jewellery to prevent delicate parts from getting scratched or broken.
Do Not Allow Overlap: Collectively, these pieces of jewellery conjoin and overlap, which can lead to twisting, scratching, or chipping. It’s best to keep jewellery items in separate boxes.
Keep It Out of Heat: Avoid revealing your artificial jewellery to heat sources like a hair dryer, a boiler heater, or a stove. High temperatures may dissolve the glue that holds the stones or cause the plating to lose colour.
Avoid Heavy Pulls: It’s best to keep jewelry items in separate boxes.
Avoid heavy pulls,” which means being careful not to put too much strain on your jewelry, especially earrings. If you’re wearing large or heavy earrings, try to be cautious. Heavy pulls can damage or irritate your earlobes. Choosing lightweight jewelry that you can wear comfortably for extended periods is always better.
Avoid Wearing It During Heavy Situations: If it is raining or snowing outside, do not wear your jewellery set, as water and weather changes may result in oxidation or fading.
Use a Microfiber Cloth to Sweep Off Dust:. Detach your jewellery and wear it as a bracelet. A microfiber cloth can help clean it more thoroughly after each use.
Some simple tips can help one take care of fake jewellery, which lasts several years.
Quick Tip: Always store fake jewellery in a soft cloth pocket or jewellery box to stop scratches and tarnishing.
FAQs
How to clean costume jewellery that smells?
To eliminate any unpleasant odour from jewellery, create a thick mixture of baking soda and water. Dab it on gently with a soft toothbrush, rinse off, and then dry thoroughly. Baking soda absorbs odours while refreshing the jewellery.
How do you clean a fake gold plated chain?
A fake gold-plated chain can be cleaned by mixing a few drops of mild dish soap with warm water. A soft cloth dipped in the soapy solution can wipe the chain and remove dirt and oil. For any cracks, a soft toothbrush can be used; however, be careful not to scrub too hard and not to damage the gold plating. Jewellery should be cleaned with water cool, followed by patting dry with a soft cloth. Finally, allow the chain to air dry completely before wearing or storing.
How to make fake gold look new again?
To refresh fake gold, gently clean it with soapy water, and dry it completely. Buff with a soft cloth to restore shine, and apply clear nail polish to protect and enhance its look.
Does vinegar clean fake gold?
Yes, vinegar can help clean fake gold by removing tarnishes.